Music Studio Vibration Control

Vibration control is one of the most critical parameters in recording and rehearsal studios. The high wavelengths of the low frequencies, which are often prevalent in a studio, make it very difficult to achieve a satisfying sound-isolation of a studio to its adjacent spaces
In order to increase the sound insulation capacity and the available space, the structural noise isolation of the multi-layer sound-insulation elements is imperative. This structural separation of the studio components is achieved by the use of advanced vibration control products. For this purpose, the last 35 years ALPHA ACOUSTIKI has been designing and producing specialized vibration control products in order to meet the highest acoustic and noise control requirements, especially for studio applications.
The vibration control products Vibro, include products that isolate vibrations on floating floors, floating ceilings and floating walls. Depending on the excitation frequency expected to prevail in a studio, the following types of anti-vibration can be selected:
• Spring mounts/jack up systems and ceiling hangers
• Rubber mounts and ceiling hangers
• Spring & rubber vibration control products for other elements of the studio.
In addition, we have designed special vibration control products for mounting and hanging audio systems and electro acoustical equipment such as line arrays, subwoofers, wall mounted speakers etc.

Vibro-AMR: Anti-Vibration Spring isolator with Lateral Restrain

Anti-vibration spring isolators with lateral restrain, used for low frequency vibration isolation

Vibro-RW: Isolation Fixing Rubber Washer

Small rubber washer specially designed to isolate mechanical fixings from transferring noise & vibration to the underlying structures. It prevents any direct connection between the retaining screw and the mounting base, avoiding unwanted sound bridges.

Vibro-Strip: rubber strip

A non-reinforced rubber bearing system with a cross-section is suitable for use as an elastic support for structural components

REGUFOAM: mixed cell polyurethane elastomer

REGUFOAM is a mixed cell polyurethane elastomer produced in different hardness grades or densities with combined spring and dampening properties. The different material densities are color coded.

REGUPOL

Vibration isolation sheets or rolls with a combination of rubber granules or fibers and polyurethane binders. REGUPOL is suitable for applications which require attenuation of impact sound and vibration, durability and resistance to mechanical loads.

Profi

Vibro-Profi is a cost effective anti-vibration mat, made from recycled PU bound rubber tire granules, in egg crate profile.

Call Now Button +30 210 6779 875