Vibro-Strip
A non-reinforced rubber bearing system with a cross-section is suitable for use as an elastic support for structural components
The bearing strip is a non-reinforced rubber bearing system with advanced wavy design. Due to its ingenious profile, the cross-section is suitable for use as an elastic support for structural components.
DIMENSIONS:
Thickness 10 mm, Width 108 mm.
It is supplied in up to 3 m lengths.
Load Range
|
TYPE |
Recommeded Load (kp*/cm2) |
|
Vibro-Strip |
3 |
*1kp = 10N
Dynamic Characteristics
Natural frequency fn= 30Hz (for perpendicular load in a single layer)
Load range 1-3 kg/cm2 (1 per 3 tonnes per linear meter)
Vibro-EP
Antivibration supports for: Air-compressors, air conditioning units, pumps, fans, generator sets, cutting machine and more. Vibro-EP is the result of specialized research and is produced in this form since 1989, made from elastomeric material mixed with special substances for its further improvement. Its longitudinal holes increase the provided compression and improve vibration absorption.
Vibro-EP metal
Antivibration Elastic Pad with Metal Cover that evenly distributes the load applied and protects the elastic part form UV exposure
Vibro-mini
Antivibration solution for light weight machinery. Can be used for antivibration mounting or hanging of ceilings or HVAC equipment.
