Vibro-SM
OUT OF PRODUCTION
Replaced by the more advanced Vibro-SMR
- SUITABLE FOR LOW-FREQUENCY VIBRATION CONTROL
- ADJUSTABLE HEIGHT AND MACHINE ALIGNMENT
- PROTECTION FROM LATERAL DISPLACEMENT
- INTERNAL ELASTIC GASKET FOR REDUCTION OF RESONANCE
- STEEL CASING FOR GREATER STRENGTH
Vibro-SM TYPE 1
Antivibration mounts Vibro-SM are used for low frequency vibration control (rotational machinery 300 RPM upwards).
The casing is made of steel with adequate thickness and is protected from oxidation with a special anticorrosive paint.
The antivibration springs comply with ISO.EN.10270 standards and have a color indication to define the maximum load capacity.
An adjustable height system exists, in order to align the machine.
Vibro-SM TYPE 2
At their base they have a special elastic profile, resistant to outdoor conditions, thus offering better isolation efficiency at high frequencies.
Antivibration mounts Vibro-SM have been designed to face lateral forces (earthquake and wind-pressure protection).
An elastic gasket is interceded between the two vertical reinforcements, to avoid creating a sound-bridge. Also through the friction that is developed, the phenomenon of resonance is decreased, during the beginning and the end of the machine operation.
Vibro-SM can be combined at the bottom with an elastic pad, named Vibro-EP, to ensure the control of vibration at a wider range of frequencies (Vibro-SM Complex).
TYPE |
SPRING NUMBER |
DIMENSIONS |
LOAD RANGE (kp*) |
SM-250.1 |
1 |
180 – 80 – 157 |
100 – 250 |
SM-500.1 |
1 |
180 – 80 – 157 |
200 – 500 |
SM-750.1 |
1 |
180 – 80 – 157 |
400 – 750 |
SM-500.2 |
2 |
250 – 100 – 175 |
200 – 500 |
SM-800.2 |
2 |
250 – 100 – 175 |
450 – 800 |
SM-1000.2 |
2 |
250 – 100 – 175 |
400 – 1000 |
SM-1500.2 |
2 |
250 – 100 – 175 |
800 – 1500 |
Other load range on request *1 kp = 10Ν
Static deflection 25 mm under maximum load
Natural frequency up to 3 Hz under maximum load