Antivibration Regufoam® Pad with Metal Cover that evenly distributes the load applied and protects the high-quality polyurethane semi-closed cells foam pad from UV exposure.
Vibro-MP.F can be used as an antivibration mount for: Small air compressors, Air conditioning units, pumps, fans, etc.
Its small dimensions offer a low cost and efficient solution for low machine loads.
- General Details
- Load Range
- Related Products
Vibro-MP.F consists of a Regufoam® pad and a specially formed galvanized metal cover. The intercession of the steel cover between the base of the machine and the high-quality polyurethane semi-closed cells foam pad, ensures the equable distribution of the load to the entire surface of the Regufoam element. At the same time, the cover protects the pad from solar UV radiation and oils. At the center of the upper side of the cover, an internal M8 x 27mm screw is incorporated, for fixing the
machine on the anti vibration mount.
There are four color coded Regufoam® types for this product, according to the maximum load per fixing.
When using this product, it is possible to achieve height regulation using two nuts with a washer (not included).
Why choose Vibro-MP.F | Antivibration Regufoam® Pads with Metal Cover:
- Easy to Install
- Can be used for Antivibration Machinery Support
- Can be used for Machinery Fixing
ANTIVIBRATION SUPPORTS: Small Air-compressors – Pumps – Fans – Air conditioning units etc.
It is generally recommended to use Vibro-MP.F for light weight equipment, where the support base of the machine has a small bearing surface and the polyurethane semi-closed cells foam pad is not uniformly loaded.
[Length x Width x Height] 6.7 x 6.7 x 2.7 cm
Internal thread: M8 x 27mm height
Regufoam® is a mixed cell polyurethane elastomer produced in six different hardness grades or densities with combined spring and dampening properties. It is the heart of Vibro-MP.F. Regufoam has an extremely low natural frequency in the corresponding load ranges, resulting in high soundproofing values. In addition, it shows very low spring deflection and high resilience. Its cellular structure guarantees extensively full surface transmissions of forces under static and dynamic weight loads.
|COLOR CODE||DIMENSIONS (cm)||MAX STATIC LOAD (daN)|
|Green||6.7 x 6.7 x 2.7||4|
|Purple||6.7 x 6.7 x 2.7||10|
|Black||6.7 x 6.7 x 2.7||22|
|Grey||6.7 x 6.7 x 2.7||40|
Dynamic Characteristics: 13 Hz at maximum load
Antivibration Elastic Pad with Metal Cover that evenly distributes the load applied and protects the elastic part from UV exposure. Vibro-EP Metal Micro can be used as an antivibration mount for: Small air compressors, pumps, fans, etc. Its small dimensions offer a low cost and efficient solution for low machine loads.