Products for Vibration Control
Antivibration supports for: Air-compressors, air conditioning units, pumps, fans, generator sets, cutting machine and more. Vibro-EP is the result of specialized research and is produced in this form since 1989, made from elastomeric material mixed with special substances for its further improvement. Its longitudinal holes increase the provided compression and improve vibration absorption.
Antivibration Elastic Pad with Metal Cover that evenly distributes the load applied and protects the elastic part form UV exposure. Vibro-EP Metal can be used as an antivibration mount for: aircompressors, pumps, fans, generator sets, cutting machines, etc. Floating supports: industrial floors, elevators, printing machines, testing machines, etc.
Vibro-3D is designed to sustain impulsive loads in all the three axis, so its capable to receive high vertical or lateral shocks with minimum danger of destruction
A spring hanger that consists of a combination of anti-vibration rubber with metal spring for better vibration isolation. Antivibration hanger Vibro CH can be used in the following applications: Sound insulation in floating ceilings as an anti-vibration Hanger (false ceiling with plasterboard) Anti-vibration machine hanging (ie FCUs), vibration isolation of pipes, air ducts, loudspeakers etc.
Anti-vibration hanger with Regufoam®, for antivibration suspension of machinery like ventilators, air conditioning, gympumboard etc.
A metal frame made of galvanized steel with notches in appropriate places and the antivibration mount Vibro mini
An antivibration mount with multiple springs- especially designed to have low height (type L) and is very effective with low frequency vibrations
Vibro-MSV is an antivibration mount with multiple springs. It is specially designed to have low height and is very effective with low frequency vibrations due to the viscous material.
Vibro-TRS.F is a special engineered and designed anti-vibration mount for electrical transformers with transportation rolls.
A combination of special rubber with metal spring for better vibration isolation of low and high frequency heard by the human ear
Heavy duty spring and rubber antivibation hangers that can be used in applications with increased total weight and limited hanging points.
Antivibration supports for gypsumboard partitions. It can be used in recording or rehearsal studio applications, or wherever a floating wall is required.
Impact noise reduction for timber wooden floors. It is primarily used in gymnasiums, dancing halls, basketball courts but can also be used in domestic applications.
Vibro-BAND is used as an antivibration intermediate band between skirting boards and the floating wooden floors.
A specially designed galvanized metal suspension hanger, which has grappling edges for QUICK AND EASY connection with the standard ceiling profiles
Suspension of sound insulation gypsum board ceilings. It can be used in all floating ceiling applications.
Antivibration solution for light weight machinery. Can be used for antivibration mounting or hanging of ceilings or HVAC equipment.
Vibro-Midi is an ingenious low-cost solution for vibration problems. Due to its innovative design, it provides an impressive deflection under load.
Jack-up anti-vibration mount for concrete floating floors. Ideal for floating floor in studios and very sensitive mechanical applications.
Jack up anti-vibration rubber mount with Regufoam for floating raised concrete floor )residential, commercial and industrial applications)
Anti-vibration wall brace that prevents horizontal vibration transmission and sound-bridges in walls structures.
Anti-vibration spring isolators with lateral restrain, used for low frequency vibration isolation
Antivibration spring mounts Vibro-SMR are a multi directional antivibration restraint with adjustable height. Vibro-SMR can be used for low frequency vibration controls (low speed rotation 400 rpm upwards) that also require lateral and vertical restrain and protection from earthquakes and excess wind pressure.
Antivibration elastic mount the metal cover for even load distribution and UV protection of the elastic part of the mount
Type 3 antivibration elastic mount for HVAC applications especially where mpunting to the floor and to the machinery is required.
Restrain for machines which are based on antivibration mounts during excitation of external forces
Vibro-Profi is a cost effective anti-vibration mat, made from recycled PU bound rubber tire granules, in egg crate profile.
The new Vibro-3D.wm is an antivibration mount that can offer vibration control in every direction. It can be an ideal solution for shock-absorbing and vibration -isolation applications.
Vibro-AM.wm is a free standing single spring anti-vibration mount, with internal knitted stainless steel wire mesh. This metal cushion inside the spring increases the damping factor and limits the vibration at the natural frequency.
Vibro- MSR.wm is an anti-vibration spring mount with multi directional restraint with relative limit stops and internal stainless steel wire mesh cushion
Vibro-MS.wm is an anti-vibration mount, with multiple free standing springs. Within the internal diameter of the coil spring there is a resilient cushion knitted stainless steel wire mesh.
Vibro.SiL product series contain anti-vibration products made of high quality silicone, that can be applied in a wide operating temperature range.
The silicone anti-vibration metal - rubber mounts, Vibro.SiL-EM.3 can offer high vibration protection for compressors, pumps, fans, exhaust gas pipes / muffler support, sensitive electronic equipment etc
The silicone anti-vibration hangers Vibro.SiL-CHmini can offer vibration protection in demanding vibration control applications for suspension of fans, exhaust gas pipes muffler hanger and other sensitive electronic equipment.