Antivibration supports for gypsumboard partitions. It can be used in recording or rehearsal studio applications, or wherever a floating wall is required.

General Details

Vibro-WS is a specially designed homogeneous rubber support systems for gypsumboard partitions. The semi-cylindrical modulation at their base (for WS.75 & 100) and the transversal holes (for WS.50), provides the necessary space for the rubber expansion to increase the deflection and consequently the vibration insulation. The inclined flaps of Vibro-WS cover the fixing bolts on the base and prevent possible contact with gypsumboard.

The application of Vibro-WS in floating gypsumboard partitions:

  • Decreases the flanking noise transmissions.
  • Interrupt the heat-bridges and the increase of moisture between humid floors and walls.
Method of application

Vibro-WS is installed on floor or ceiling metal profiles (U-runner with width 50, 75 or 100mm) in correspondence to the C-studs or it could also be installed unified, specifically under the U-runner. They can be fixed on the profiles with bolts and on floor or ceiling with expansion bolts.
The free spaces must be filled with sound absorption material (e.g. rockwool).
Part or all of base’s lateral flaps, of Vibro-WS, can be cut easily due to its incisions, for applications with smaller thickness (e.g. single gypsumboard) than the flap’s length.

ATTENTION:
Metal washer must be also used in every fixed point.

Application Photos

The following images show applications of Vibro-WS.

+30 210 6779 875