Multi-directional anti-vibration mount
  • Suspension of exhaust gas pipes.
  • Marine & aviation APPLICATIONS.
  • Support of freon cooling pipelines.
  • Mounting of high RPM engines.
  • Mounting of electronic devices.
  • Suspension & on-wall fastening of loudspeakers.
  • Anti-seismic protection of machines.

The new antivibration mount Vibro-3D is one of the few antivibration mounts that can support vibration of every direction (x,y,z).
Vibro-3D is designed to sustain impulsive loads in all the three axis, so its capable to receive high vertical or lateral shocks with minimum danger of destruction.
The main internal elastic material is polyurethane foam with semi closed cells, which is produced in Germany by BSW with the trademark Regufoam®. Full range of its mechanical behavior diagrams, conducted in the University of Dresden, are available on request.

Vibro-3D Selection Table

The galvanized metallic shell of Vibro-3D protects the internal elastic parts from corrosive environments and therefore ensures longevity even in very hard and corrosive conditions. Additionally Vibro-3D meets high safety standards due to its unique design that even in case of exposure in destructive conditions (Fire) that will destroy the internal elastic parts, its top fixing, that holds the suspended device does not fail (Fail Safe).

Vibro-3D covers a wide range of loads, due to its capability to change the density and stiffness of the internal polyurethane foams, it also has the ability of angular misalignment of up to 150.

It is available with Female ending (type F), male (type Μ), and with special top female fixing for mounting (type SF).

Vibro-3D can be used either for mounting or for suspension of respectively loads.

Note: The maximum load for the radial force shall be 15% of the mounting load.

On your order please specify:

a) The maximum static load

b) The proposed use of Vibro-3D :

  • Β: Mounting
  • Η: Suspension

c) The type of ending :

  • M = Male
  • F = Female
  • SF = Special top Fixing

Typical order : Vibro-3D/brown/Β-SF

The specialized technical department of our company is at your service in order to help you chose the appropriate type of Vibro-3D for every individual project.

Some applications of Vibro-3D can be shown below:

Related Products

Antivibration supports for: Air-compressors, air conditioning units, pumps, fans, generator sets, cutting machine and more...
Vibro-EP metal
Vibro-EP metal
Antivibration Elastic Pad with Metal Cover that evenly distributes the load applied and protects the elastic part form UV exposure
Antivibration solution for light weight machinery. Can be used for antivibration mounting or hanging of ceilings or HVAC equipment.
A non-reinforced rubber bearing system with a cross-section is suitable for use as an elastic support for structural components
Antivibration elastic mount the metal cover for even load distribution and UV protection of the elastic part of the mount
Type 3 antivibration elastic mount for HVAC applications especially where mpunting to the floor and to the machinery is required.